DISHES AND DRINKS WILL TASTE BETTER

— because the purified water does not contain chlorine, pesticides, heavy metals, organic compounds, viruses and bacteria

— due to high capacity there is enough water for everyone 

YOUR APPLIANCES ARE PROTECTED

— long service life due to lack of scale

— Up to 50% of dishwasher detergents consumption

RObust 1000 is a compact high-performance reverse osmosis filter. Allows you to get pure, safe water for drinking and cooking.

Performance

— Pre-filtration removes mechanical impurities, active chlorine, organochlorine compounds, as well as natural organic substances
— Membrane removes up to 99.8% of dissolved impurities, as well as viruses and bacteria
— To improve the taste and smell of purified water is post-processed on activated carbon Chemviron Carbon

High pressure pump supplies water on 2 consistently installed membrane elements. Permeate (membrane purified water) after treatment flows to activated carbon filter, and concentrate (waste water) flows to second stage of membrane filtration, that allows sufficiently minimization of waste water (concentrate).

After RO-purification concentrate is through the flow limiter is discharged into the sewer. Before third membrane is installed the second manometer, which monitor pressure in membrane unit. 

Replacement filter and membrane change

There are 2 manometers on the front panel of RObust 1000. The first shows membrane inlet pressure after pre-treament filters and the second shows pressure on membrane block after pump. The panel shows recommended pressure values for pressure gauges and recommendations for eliminating possible problems if these values do not correspond to the required ones.

Replacement filter maintenance

If the pressure after pre-treatment filters is less than 1 bar, this may indicate that the replacement filter need to be changed. Delay in replacing can damage or destroy the membrane. Pre-treatment replacement filters should be replaced after purifying 2 100 gallons of water, but at least once every 3 months. The resource depends on the flow and quality of the feed water.

Membrane element

If the filtration rate drops significantly, it is necessary to replace the RO membranes. We recommend replacing the RO membranes after purifying of 6 400 gallons of water, but at least once a year in order to obtain purified water of constant quality.  

In the case of long interruptions in the filter operation (over 2 weeks), it is necessary to disinfect the filter (the procedure is described in detail in the manual)

Carbon post filter

If the taste of purified water is significantly degraded, an unpleasant odor appears, it is recommended to replace the carbon post-filter. The post-filter should be changed after purifying of 2 100 gallons of water, but at least once every 3 months.

Pump maintenance

Pump operation requires periodic maintenance (the same as other appliances). The main operation of pump maintenance is replacing pump diaphragm.

We recommend to replace diaphragm every 2000 hours of its operation.